International Journal of Engineering

Author Index

A

Aazami, R. Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
Abdi, S. Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
Abdolahi, M. A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
Abdollahi, M. Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
Abdulmajeed, B. A. Synthesis, Characterization, and Application of EDTA-Coated Maghemite Magnetic Nanoparticles for Oil Spill Cleanup from Water Surface [Volume 37, Issue 8, 2024, Pages 1500-1509]
Abed, M. M. Synthesis, Characterization, and Evaluation of an Eco-friendly Demulsifier for Crude Oil Emulsion Treatment Using Waste Corn Oil [Volume 37, Issue 3, 2024, Pages 468-475]
Aboumdian, S. Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
Abualigah, L. Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
Afshar, M. A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
Afulay Bouzid, A. A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
Agarwal, V. Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
Agarwal, V. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Aghaali, V. Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
Ahmad, S. T. P. Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
Ahmadizar, F. Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
Ahmadizar, F. Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
Ait Abbas, H. Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
Akhtarpour, A. Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
Alabdali, Z. N. Analysis of Particle Size in Composite Materials Using Image Processing [Volume 37, Issue 4, 2024, Pages 579-587]
Al-bosham, A. Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
Al-Dahawi, A. M. A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
Al-Hindawi, L. A. A. A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
Ali Bash, M. A. Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
Alizadeh, F. Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
AL-Jaberi, L. A. Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
Alkalid, F. F. Analysis of Particle Size in Composite Materials Using Image Processing [Volume 37, Issue 4, 2024, Pages 579-587]
AlSaraj, W. Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
Al-Zuheriy, A. S. J. A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
Ameri, M. Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
Amiri, A. Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]
Ananda, V. R. Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
Anjomrouz, A. Improvement of Surface Evaporation by Reducing Heat Transfer to Fluid Bulk and Increasing Heat Absorption [Volume 37, Issue 6, 2024, Pages 1154-1163]
Ansari, M. A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
Anwar, A. Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
Arjmandazar Varjovi, M. Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
Arkat, J. Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
A. Sadreddini, S. M. Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
Asgari, H. Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
Ashish, A. Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
Asiri, A. M. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Ataei, H. Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
Awda, M. J. Synthesis, Characterization, and Application of EDTA-Coated Maghemite Magnetic Nanoparticles for Oil Spill Cleanup from Water Surface [Volume 37, Issue 8, 2024, Pages 1500-1509]
Azadi, M. Effect of Training Data Ratio and Normalizing on Fatigue Lifetime Prediction of Aluminum Alloys with Machine Learning [Volume 37, Issue 7, 2024, Pages 1296-1305]

B

Babyr, N. V. Topical Themes and New Trends in Mining Industry: Scientometric Analysis and Research Visualization [Volume 37, Issue 2, 2024, Pages 439-451]
Bagheri, A. Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
Bahrami Kian, Y. Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
Baimukhametov, G. F. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Bakhshi-Jooybari, M. Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
Balaji, B. Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
Balaji, B. Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
Balaji, B. Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]
Balaji, B. Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]
Balaji, B. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Banejad, M. Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
Baniasad Askari, I. Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
Barkhordari, K. Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
Bessonov, A. E. Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
Bhat, R. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Bhat, S. K. Predictive Modelling and Optimization of Double Ring Electrode Based Cold Plasma Using Artificial Neural Network [Volume 37, Issue 1, 2024, Pages 83-93]
Biglarahmadi, M. A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
Biswas, S. Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
B. Lourenço, P. Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
Bolouri Bazaz, J. Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
Bouguebrine, C. Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
Boushra, A. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Buddhawar, G. Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
Budi Prasetyo, A. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Budiyantoro, C. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Bui Minh, D. Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
Buslaev, G. V. Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
Buttol, S. Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]

C

Caronge, M. A. Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]
Chadaga, R. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Chattopadhyay, C. Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
ChayaDevi, S. K. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Cheerala, S. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Chupong, P. Computational Framework Development to Investigate Al Matrix with Low-Velocity Impact Behavior at Varied Temperatures for Cold Spray Composite Coating Design: Al/TiN Case [Volume 37, Issue 4, 2024, Pages 804-817]

D

Dang Quoc, V. Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
Dastgiri, A. Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
Deepak, G. D. Predictive Modelling and Optimization of Double Ring Electrode Based Cold Plasma Using Artificial Neural Network [Volume 37, Issue 1, 2024, Pages 83-93]
Deepak, M. Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
Demenkov, P. A. Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
Dengaev, A. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Dengaev, A. V. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Derife, M. Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
Dey, A. Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
Domiri Ganji, D. A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
Domiri Ganji, D. Optimizing Heat Transfer in Microchannel Heat Sinks: A Numerical Investigation with Nanofluids and Modified Geometries [Volume 37, Issue 5, 2024, Pages 860-875]
Dorrani, Z. Traffic Scene Analysis and Classification using Deep Learning [Volume 37, Issue 3, 2024, Pages 496-502]
Drozdov, I. M. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]

E

Ebrahimzadeh, A. Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
Efremenko, D. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Einy-Sarkalleh, G. R. A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
Ekhlassi, A. Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
El Ghoulbzouri, A. Seismic Vulnerability of Irregular Reinforced Concrete Buildings Considering the Soil-structure Interaction [Volume 37, Issue 1, 2024, Pages 104-114]
EL Ghoulbzouri, A. Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
El Janous, S. Seismic Vulnerability of Irregular Reinforced Concrete Buildings Considering the Soil-structure Interaction [Volume 37, Issue 1, 2024, Pages 104-114]
El Janous, S. Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
Elmkhah, H. Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
El Yassari, S. Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
Eqbali, A. H. Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
Erigela, R. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Esmaeilzadeh, Z. Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]

F

Fadlil, A. Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
Falaghi, H. Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]
Fallah, M. Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
Fallah, M. Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
Fallahi, A. A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
Faraji, A. Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
Farash Bamoharram, F. Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
Farrokh, F. Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
Farsi, H. Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
Fatehi-Dindarlou, M. H. A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
Fereshteh-Saniee, N. Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
Fergani, O. A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
Firouzi, F. Thermodynamic Simulation of an Efficient Flash Ironmaking Technology for Chadormalu Mining and Industrial Company [Volume 37, Issue 5, 2024, Pages 1012-1021]
Fitriadi Kurnia, R. Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
Foomani, A. H. Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
Fouladi, G. R. Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
Fuming, Z. Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
Fuming, Z. A Leak Detection Method for Underground Polyethylene Gas Pipelines Using Simulation Software Ansys Fluent [Volume 37, Issue 8, 2024, Pages 1615-1621]
Furizal, F. Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]

G

Gavadimoghaddam, M. R. Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
Ghaderi, F. Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
Ghaemifard, S. Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
Ghamari, M. Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
Ghanbari Sorkhi, A. Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
Ghannadiasl, A. Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
Ghasemi, R. Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
Ghasemi, S. Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
Ghodratnama, A. Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
Gholam Abri, A. Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
Girija Sravani, K. Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
Golabchi, M. Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
Gorji, H. Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
Gowthami, Y. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Gulhane, N. P. Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]

H

Hadiani, N. Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
Hadji Molana, S. Y. A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
Hafezalkotob, A. A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
Hafezalkotob, A. Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
Hait, P. Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
Haldar, R. Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
Hamidi, H. A Model for Scheduling of Electric Vehicles Charging in a Distribution Network using Multi-agent Model [Volume 37, Issue 2, 2024, Pages 402-411]
Hamidi, H. Presenting a Model to Detect the Fraud in Banking using Smart Enabling Tools [Volume 37, Issue 3, 2024, Pages 529-537]
Hamidi, H. A Model for Analysis of Social Media in Adoption of Mobile Banking [Volume 37, Issue 7, 2024, Pages 1384-1394]
Harsej, F. Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
Hasan Ghasemi, M. Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
Hasanpour, H. Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
Hasyim, S. Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
Heydari, M. A New Comprehensive Model for Integrating Environmental, Economic, and Social Performance of Deep and Large-scale Open-Pit Copper Mines [Volume 37, Issue 1, 2024, Pages 1-13]
Hilali, E. Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
H. Joshaghani, A. Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
Hosseini, S. E. Accurate Analytical Modeling of Drain Current of Heterojunction Tunneling Field Effect Transistor [Volume 37, Issue 7, 2024, Pages 1331-1342]
Hosseini Nasab, M. Ash Reduction of the Tailings of Agh-Darband Coal Washing Plant by Flotation Method [Volume 37, Issue 4, 2024, Pages 739-752]
Hosseinpour, M. Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
Hossein Zadeh Lotfi, F. Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
Howldar, S. Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
Howldar, S. Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]

I

Imam Cahyadi, A. Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
Imanifar, A. Using Reluctance Torque Theory in Spoke Type Permanent Magnet Vernier Motors to Increase Average Torque [Volume 37, Issue 6, 2024, Pages 1183-1193]

J

Jabbar Hassan, A. Experimental Study of Thermal Ageing and Hydrogen Embrittlement Effect on the Equipments of a Rocket Engine [Volume 37, Issue 1, 2024, Pages 56-66]
Jadhav, S. P. Dry Sliding Behaviour Study of Novel Low-metallic Friction Materials by using DoE-Taguchi Method [Volume 37, Issue 3, 2024, Pages 452-459]
Jafarpour, H. Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
Jalili, B. A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
Jalili, P. A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
Jamali, J. A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
Jariwala, K. Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
Jazayeri, O. Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
Jazayeriy, H. Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
Joudaki, E. Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
Joudaki, J. Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
Julistiono, H. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Jureje, U. Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]

K

Kang, W. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Karbasiyan, M. Presenting a Model to Detect the Fraud in Banking using Smart Enabling Tools [Volume 37, Issue 3, 2024, Pages 529-537]
Kareem Jabbar, A. Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
Karimi, M. S. Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
Karthik, R. Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
Kayumov, A. A. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Kazemipour, H. Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
Keighobadi, J. Deep Reinforcement Learning with Immersion- and Invariance-based State Observer Control of Wave Energy Converters [Volume 37, Issue 6, 2024, Pages 1085-1097]
Keksin, A. I. Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
Khalilzadeh, R. Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
Khan, A. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Khanmohammadi, M. Numerical Studies on Performance of Helical Pile-supported Embankments Over Soft Clay [Volume 37, Issue 4, 2024, Pages 596-607]
Khanmohammadi, M. Proposing New Artificial Intelligence Models to Estimate Shear Wave Velocity of Fine-grained Soils: A Case Study [Volume 37, Issue 6, 2024, Pages 1164-1174]
Khodadadi, M. A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
Khodadadi, Z. Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]
Khosravi, H. Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
Khosravi, M. H. Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
Kini K., P. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Kiran, B. M. Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
Korobov, G. Y. Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
Kumar, R. Performance and Economic Analysis of the Utilization of Construction and Demolition Waste as Recycled Concrete Aggregates [Volume 37, Issue 3, 2024, Pages 460-467]
Kumar Kusumanchi, T. P. S. Design and Optimization of High-gain Series and Parallel-fed Array Antennas for Enhanced Gain and Front-to-back Ratio in X-Band Applications [Volume 37, Issue 3, 2024, Pages 546-555]
Kumbhar, V. Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
Kumoro, A. C. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
Kurniawan, B. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
Kusumastuti, R. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]

L

Lajevardi, S. H. Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
Lap-Arparat, P. Development of Temperature-strain Prediction Based on Deformation-induced Heating Mechanism in SCM440 Surface Cracked Shaft under Ultrasonic Excitation [Volume 37, Issue 1, 2024, Pages 151-166]
Laroussi, K. Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
Latief, Y. Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
Le, B. T. Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
Le, T. H. A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]
Lekomtsev, A. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Lesani, H. Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
Leusheva, E. L. Evaluation of Possible Application of Powder Made from Fallen Tree Leaves as a Drilling Mud Additive [Volume 37, Issue 8, 2024, Pages 1592-1599]
Li, Z. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Lisin, V. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Loseva, A. V. Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]

M

Maghfiroh, H. Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
Mahboob, M. A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
Mahdavi, K. Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
Mahdiyar, O. A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
Mahmood Ali, S. A Novel Design and Simulation of a Nano Prosthetic Artificial Heart Valves [Volume 37, Issue 2, 2024, Pages 237-251]
Majdi, A. Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
Manavalla, S. An Innovative and Reliable Hybrid Cooling Method for Electric Vehicle Motors [Volume 37, Issue 7, 2024, Pages 1263-1273]
Manik, P. Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
Marchione, F. Stone Architecture in Abruzzo: Seismic Risk Analysis of Bell Tower of the Church of San Lorenzo in San Buono [Volume 37, Issue 6, 2024, Pages 1118-1126]
Maricar, F. Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
Marjani, A. Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
Mashayekhi, M. A. Numerical Studies on Performance of Helical Pile-supported Embankments Over Soft Clay [Volume 37, Issue 4, 2024, Pages 596-607]
Matin, M. Effect of Training Data Ratio and Normalizing on Fatigue Lifetime Prediction of Aluminum Alloys with Machine Learning [Volume 37, Issue 7, 2024, Pages 1296-1305]
Mazaheri, H. Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
Mazaheri, H. Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
Mazari, A. Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
Mazari, A. A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
Mechgoug, R. A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
Meddeber, M. Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
Medjdoubi, A. Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
Mikhailov, A. V. Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
Mirhosseini, S. M. Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
Mirzadeh, I. Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
Mitra, R. Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
Moazemi Goudarzi, A. Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
Moazemi Goudarzi, A. Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
Mohamadzadeh, S. Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
Mohammadi, G. Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
Mohammadi, M. A Model for Analysis of Social Media in Adoption of Mobile Banking [Volume 37, Issue 7, 2024, Pages 1384-1394]
Mohammadi, M. Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
Mohammadian KhalafAnsara, H. Deep Reinforcement Learning with Immersion- and Invariance-based State Observer Control of Wave Energy Converters [Volume 37, Issue 6, 2024, Pages 1085-1097]
Mohammadzadeh, M. Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
Mohammed Naji, T. Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
Mokhtari, H. A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
Molaei, M. Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
Molani Aghdam, M. Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
Moradloo, A. J. Seismic Assessment of Concrete Dams, Considering Anisotropy Caused by Lift Joints [Volume 37, Issue 4, 2024, Pages 753-762]
Moradlou, M. Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
Morshedsolouk, F. Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
Mouhine, M. Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
Mousavipoor, R. Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
Mousazadeh Mousavi, S. Y. A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
Mousazadeh Mousavi, S. Y. Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
Mozafari, S. B. Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
Muis, A. CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
Mu’min, M. A. Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
Munazat, D. R. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
Musabikha, S. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]

N

Nabian Dehaghani, M. A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
Naceri, B. Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
Nagendra, R. Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
Naife, T. M. Synthesis, Characterization, and Evaluation of an Eco-friendly Demulsifier for Crude Oil Emulsion Treatment Using Waste Corn Oil [Volume 37, Issue 3, 2024, Pages 468-475]
Najafi, E. Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
Najafi, M. Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
Najafi, S. E. A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
Najjarpour, M. Probabilistic Reactive Power Flow Optimization of Distribution System in Presence of Distributed Units Uncertainty Using Combination of Improved Taguchi Method and Dandelion Algorithm [Volume 37, Issue 1, 2024, Pages 37-47]
Nakhaei Zadeh, A. Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
Naseri, J. Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
Nasiri Khamesloo, F. Optimizing Heat Transfer in Microchannel Heat Sinks: A Numerical Investigation with Nanofluids and Modified Geometries [Volume 37, Issue 5, 2024, Pages 860-875]
Navabakhsh, M. Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
Nazarian, P. Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
Nguyen, V. T. Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
Nguyen Vu, T. Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
Nikitasari, A. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Niknezhad, S. Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
Nikoohemmat, M. A. Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
Nikzad, M. Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
Nouranbakhsh, M. Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
Nugraha, H. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Nuraini, L. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Nurrochmad, F. Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]

O

Osanloo, M. A New Comprehensive Model for Integrating Environmental, Economic, and Social Performance of Deep and Large-scale Open-Pit Copper Mines [Volume 37, Issue 1, 2024, Pages 1-13]
Owlia, M. S. Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]

P

Padmaja, P. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Palaev, A. G. A Leak Detection Method for Underground Polyethylene Gas Pipelines Using Simulation Software Ansys Fluent [Volume 37, Issue 8, 2024, Pages 1615-1621]
Palaev G., A. Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
Pappula, L. Design and Optimization of High-gain Series and Parallel-fed Array Antennas for Enhanced Gain and Front-to-back Ratio in X-Band Applications [Volume 37, Issue 3, 2024, Pages 546-555]
Parekh, V. P. An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
Pasandideh, S. H. R. Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
Patel, L. S. An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
Patel, S. Effect of Crushing Process Parameters on Quality of Fly Ash Aggregates Produced After Crushing High Strength Fly Ash Blocks: A Laboratory Investigation [Volume 37, Issue 3, 2024, Pages 511-519]
Patil, S. S. Effect of Varying Glass Powder Size on Performance of Cement Mortar: Microstructural and Compressive Strength Assessment at High Temperatures [Volume 37, Issue 4, 2024, Pages 794-803]
Patil, Y. D. Effect of Varying Glass Powder Size on Performance of Cement Mortar: Microstructural and Compressive Strength Assessment at High Temperatures [Volume 37, Issue 4, 2024, Pages 794-803]
Pedapudi, M. C. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Peng, B. Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II [Volume 37, Issue 1, 2024, Pages 136-150]
Penkov, G. M. Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
Petrakov, D. G. Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
Peyravi, F. Accurate Analytical Modeling of Drain Current of Heterojunction Tunneling Field Effect Transistor [Volume 37, Issue 7, 2024, Pages 1331-1342]
Poilov, V. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Pourghazi, A. A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
Preethi, B. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Prifiharni, S. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Priyotomo, G. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]

Q

Quoc, V. D. A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]

R

Raad Shaker, H. Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
Rabiei, A. Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
Rahbar, M. Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
Rahgoshay, M. A. A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
Rahimipour, M. R. Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
Rahmani Parchicolaie, B. A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
Rahmanpour, M. Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
Rajabloo, A. Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
Ramalinga Reddy, Y. Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
Ramavath, S. Optimal Prediction of Shear Properties in Beam-Column Joints Using Machine Learning Approach [Volume 37, Issue 1, 2024, Pages 67-82]
Rameshbhai, B. J. Investigating Hostile Post Detection in Gujarati: A Machine Learning Approach [Volume 37, Issue 7, 2024, Pages 1284-1295]
Ramezani, M. Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]
Rana, K. Investigating Hostile Post Detection in Gujarati: A Machine Learning Approach [Volume 37, Issue 7, 2024, Pages 1284-1295]
Ranjith, A. Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
Rathod, A. M. Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]
Razavi, S. Proposing New Artificial Intelligence Models to Estimate Shear Wave Velocity of Fine-grained Soils: A Case Study [Volume 37, Issue 6, 2024, Pages 1164-1174]
Redondo, A. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
Resen, A. M. Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
Rezaei, M. Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
Rezala, A. Experimental Study of Thermal Ageing and Hydrogen Embrittlement Effect on the Equipments of a Rocket Engine [Volume 37, Issue 1, 2024, Pages 56-66]
Riadi, I. Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
Riazi, L. A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
Ridzuan, M. J. M. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Riztian Nugraha, A. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
Rochardjo, H. S. B. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Rohbani, H. Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
Rohith Sai, K. Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
Rosyidan, C. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
Rozhkova, Y. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]

S

Sadeghpour, M. Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
Sadrnezhaad, S. K. Thermodynamic Simulation of an Efficient Flash Ironmaking Technology for Chadormalu Mining and Industrial Company [Volume 37, Issue 5, 2024, Pages 1012-1021]
Saeed, R. Seismic Assessment of Concrete Dams, Considering Anisotropy Caused by Lift Joints [Volume 37, Issue 4, 2024, Pages 753-762]
Safari, M. Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
Safiullin, R. N. Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
Safiullin, R. R. Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
Safiullina, E. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Safiullina, E. U. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Sahragard, E. Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
Salam, N. Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
Saleh Pallu, M. Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
Samuel, S. Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
Sargin, B. V. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Sawant, S. H. Dry Sliding Behaviour Study of Novel Low-metallic Friction Materials by using DoE-Taguchi Method [Volume 37, Issue 3, 2024, Pages 452-459]
Saychenko, L. A. Hydrodynamic Modeling and Evaluation of Partial Substitution of Cushion Gas During Creation of Temporary Underground Gas Storage in an Aquifer [Volume 37, Issue 7, 2024, Pages 1221-1230]
Selvan, J. An Innovative and Reliable Hybrid Cooling Method for Electric Vehicle Motors [Volume 37, Issue 7, 2024, Pages 1263-1273]
Seyed Hosseini, S. M. Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
Shah, S. K. Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
Shahanaghi, K. Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
Shahnazari-Shahrezaei, P. Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
Shahparasti, M. Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
Shahraeini, M. A Complex Network-based Approach for Designing of Wide Area Measurement Systems in Smart Grids using Adam-Eve Like Genetic Algorithm [Volume 37, Issue 2, 2024, Pages 298-311]
Shakeri, M. Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
Shamshiri, F. Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
Sharafeddin, R. Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
Shasfand, S. Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
Shateri, A. A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
Shedthi B., S. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Shetty, V. Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
Shi, L. Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II [Volume 37, Issue 1, 2024, Pages 136-150]
Shibanov, D. A. Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
Shirinabadi, R. Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
Shirkhani, M. Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
Shishulin, V. V. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Shojaei, A. Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
Siddique, U. M. Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]
Sidibe, M. S. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Sihombing, L. B. Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
Singh, S. Effect of Crushing Process Parameters on Quality of Fly Ash Aggregates Produced After Crushing High Strength Fly Ash Blocks: A Laboratory Investigation [Volume 37, Issue 3, 2024, Pages 511-519]
Singh, T. P. Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
Sirisha, G. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Smirnova, E. A. Hydrodynamic Modeling and Evaluation of Partial Substitution of Cushion Gas During Creation of Temporary Underground Gas Storage in an Aquifer [Volume 37, Issue 7, 2024, Pages 1221-1230]
Soegijono, B. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
Soltanifar, R. A Complex Network-based Approach for Designing of Wide Area Measurement Systems in Smart Grids using Adam-Eve Like Genetic Algorithm [Volume 37, Issue 2, 2024, Pages 298-311]
Sorokopud, N. I. Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
Sreenu, R. Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
Srinivasa Rao, K. Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
Srinivasa Rao, K. Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
Srinivasa Rao, K. Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]
Srinivasa Rao, K. Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]
S. Sousa, H. Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
Sunardi, S. Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
Sunardi, S. CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
Supraba, I. Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
Suryawanshi, S. R. Optimal Prediction of Shear Properties in Beam-Column Joints Using Machine Learning Approach [Volume 37, Issue 1, 2024, Pages 67-82]
Suryawanshi, S. R. Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
Susanti, S. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
Susetyo, F. B. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]

T

Tananykhin, D. S. Scientific and Methodological Support of Sand Management During Operation of Horizontal Wells [Volume 37, Issue 7, 2024, Pages 1395-1407]
Tavakkoli-Moghaddam, R. Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
Tavakkoli-Moghaddam, R. A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
Tavassoli, A. A Model for Scheduling of Electric Vehicles Charging in a Distribution Network using Multi-agent Model [Volume 37, Issue 2, 2024, Pages 402-411]
Thanh, B. D. A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]
Tian, H. Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
Tjaronge, M. W. Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]
Tkouti, N. A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
Toloei, A. Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
Torkaman, H. Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
Tousi, B. Probabilistic Reactive Power Flow Optimization of Distribution System in Presence of Distributed Units Uncertainty Using Combination of Improved Taguchi Method and Dandelion Algorithm [Volume 37, Issue 1, 2024, Pages 37-47]
Triatmadja, R. Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
Triwardono, J. Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
Truong Cong, T. Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
Trushko, O. V. Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
Trushko, V. L. Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
Tuchinda, K. Development of Temperature-strain Prediction Based on Deformation-induced Heating Mechanism in SCM440 Surface Cracked Shaft under Ultrasonic Excitation [Volume 37, Issue 1, 2024, Pages 151-166]
Tuchinda, K. Computational Framework Development to Investigate Al Matrix with Low-Velocity Impact Behavior at Varied Temperatures for Cold Spray Composite Coating Design: Al/TiN Case [Volume 37, Issue 4, 2024, Pages 804-817]

U

Ulya, H. N. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
Umar, R. Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]

V

Vafaee, F. Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
Vagh, A. S. An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
Vahedi, A. Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
Vajdian, M. Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
Vakhin, A. V. Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
Vatandoost, M. Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
Vemana Chary, D. Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
Vidia Putra, V. G. Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
Vorontsov, A. A. Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
Vo Thanh, H. Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]

W

Wahyunggoro, O. Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
Wardhani, D. H. Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]

Y

Yadav, N. Performance and Economic Analysis of the Utilization of Construction and Demolition Waste as Recycled Concrete Aggregates [Volume 37, Issue 3, 2024, Pages 460-467]
Yaghobi, H. Using Reluctance Torque Theory in Spoke Type Permanent Magnet Vernier Motors to Increase Average Torque [Volume 37, Issue 6, 2024, Pages 1183-1193]
Yaghobi, H. Synchronous Generator Dual Estimation Using Sigma Points Kalman Filter [Volume 37, Issue 7, 2024, Pages 1239-1251]
Yahyaoui, K. Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
Yang, H. Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
Yang, X. Framework of Electric Vehicle Fault Diagnosis System Based on Diagnostic Communication [Volume 37, Issue 6, 2024, Pages 1194-1207]
Yashwanth, M. K. Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
Yazdani, M. Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
Yazdani, S. A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
Yifan, T. Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
Yogafanny, E. Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
Yudha, V. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Yudhana, A. Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
Yudhana, A. CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
Yudhanto, F. Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
Yulianti, S. Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]

Z

Zahrai, S. M. Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
Zakirov, N. N. Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
Zoghi, M. Synchronous Generator Dual Estimation Using Sigma Points Kalman Filter [Volume 37, Issue 7, 2024, Pages 1239-1251]
Zolriasatein, A. Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]